OPTOELECTRONICS
Unique And Innovative RF Test Equipment
PRODUCTS
Video Sweeper
Wireless Camera Detector
The Optoelectronics, Inc. Video Sweeper is a fast scanning receiver that detects wireless video cameras from 900MHz-2.52GHz.
With a 2.5 TFT color LCD the Video Sweeper shows you what the hidden camera is looking at. A separate smaller LCM displays the frequency and the signal strength of the signal the Video Sweeper locked on to. The Video Sweeper quickly scans all the available video frequencies used in about 15 seconds.
The Video Sweeper works with a full range of video protocols including NTSC,
PAL, CCIR or EIA systems. The Video Sweeper has both an automatic and manual
scan mode and an alarm may be activated for an audible alert when a camera
is detected.
The Video Sweeper can detect some signals from as far away as 500 feet.
The detection distance depends upon the power output of the transmitter
and the sensitivity level selected on the unit. The Video Sweeper has 5
separate receive sensitivity settings ranging from -20dBm to -60dBm.
$599
Frequency Range 900MHz to 2.52GHz
Detects NTSC, PAL, CCIR, EIA systems
Signal strength indicator
5 selectable receive sensitivity settings
Audible beeper alert
Detection distance up to 500 feet
2.5 TFT color LCD display
Scans frequency range in 15 seconds
Includes AC adapter, two antennas and case
Operates on 4 AA batteries
Automatic or manual scan
LCM displays frequency and signal strength
Audio and Video output jacks for external use
Size: 4.75H x 2.75W x 1.5D
| Frequency Range | 900MHz-2.52GHz |
| Sensitivity | -20dBm to -60dBm |
| Display | 2.5 TFT color display with LCM display for frequency |
| Video Protocols | Detects NTSC, PAL, CCIR and EIA systems |
| Scan Speed | Scans entire frequency range in 15 seconds |
| Size | 4.57"H x 2.75"W x 1.5"D |
| Weight | 12oz |
| Battery | Internal 4 AA alkaline, NiCD,NiMH batteries (not included) |
| Operating Time | 2 hours |
| Power | 5vdc, 2amp 110-240v center positive adapter included. |
| External Connection | 3.5mm mono Alarm and Video output |